Dreambox 500S Satellite Receiver, DM500S

Dreambox 500S Satellite Receiver, DM500S Description

The Dreambox 500S Satellite Receiver is the smallest Linux satellite TV receiver, with 1 x Smartcard-Reader.

• 1. 250 MHz IBM PowerPC Processor (350 Mips)
• 2. 2 LED status
• 3. Linux Operating System
• 4. Full automatic service scan
• 5. Supports directly bouquet-lists (indirect unlimited)
• 6. Supports multiple LNB-Switching control (supports DiSEqC)
• 7. 1 x Smartcard-Reader
• 8. Unlimited channel lists for TV/Radio
• 9. SPDI/F nterface for digital bit stream out (AC-3 / DTS)
• 10. MPEG2 Hardware decoding
• 11. Channel-change time < 1 second
• 12. Fully adaptable OSD in many languages (skin-support)
• 13. 100Mbit full duplex Ethernet Interface
• 14. Supports EPG (electronic program guide)
• 15. 1 x Scart-interfaces (fully controlled by software)

DreamBox 500S Satellite Receiver Video decoder:

• Video Compression MPEG-2 and MPEG-1 compatible
• Video Standard PAL and NTSC
• Video Formats 4:3 / 16:9
• Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
• Letterbox precolating for 4:3 TV-Device Audio decoder:
• Audiokompression MPEG-1 & MPEG-2 Layer I and II
• Audio Mode Dual (main/sub), Stereo
• Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

DreamBox 500S Satellite Receiver Video parameter:

• Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
• Teletext filter in conformity with ETS 300 472 Standard

DreamBox 500S Satellite Receiver DBS-Tuner:

• Frequency Range 950 .. 2150 MHz
• Signal Level - 65 dBm .. - 25 dBm
• Signal-to-Noise Level 12 dB max.
• DBS-Tuner Input Connector F-Type female
• Input Impedance 75 Ohm
• AFC +/- 3 MHz
• Demodulation Shaped QPSK
• Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
• FEC Viterbi and Reed-Solomon
• Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
• Roll-off Factor 35 %
• Demultiplexing according ISO 13818-1

DreamBox 500S Satellite Receiver TV-Scart:

• Output: FBAS,RGB,S-VHS over OSD selectable

DreamBox 500S Satellite Receiver Ethernet:

• 100 MBit compatible, bi-direktional interface
• Function Update of Firmware and Preprogramming

DreamBox 500S Satellite Receiver Count of active satellite position:

• DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
• DiSEqC - Rotor Control

DreamBox 500S Satellite Receiver LNB Power and polarisation:

• LNB Current 500mA max. ; short-circuit-proof
• LNB Voltage vertical < 14V without load, > 11,5V at 400mA
• LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
• LNB shut-off at Standby-Mode

DreamBox 500S Satellite Receiver Output digital:

• Output Level 0,5 Vss on 75 Ohm
• Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
• S/PDIF-Output optical (AC3)

DreamBox 500S Satellite Receiver Serielle Interface RS 232:

• Typ RS232 bidirectional
• Bit rate 115,2 kBit/s max.
• Plug Connector SUB-D-9
• Function Update of Firmware and Preprogramming

DreamBox 500S Satellite Receiver Power consumption: < 10W / 12V

DreamBox 500S Satellite Receiver Output analog:

• Output Level L/R 0,5 Vss on 600 Ohm
• THD > 60 dB (1 kHz)
• Crosstalk < -65 dB

DreamBox 500S Satellite Receiver Input voltage:

• DC12V,alternating acurrent +/- 15%

DreamBox 500S Satellite Receiver Extern power supply:

• Input:110-240V AC / 50-60Hz / 0,6A
• Output:12V = / 1A

DreamBox 500S Satellite Receiver Others:

• Ambient Temperature +15°C...+35°C
• Humidity < 80%